46
Digital Video Recorder User Manual
4.5 Alarm configuration
Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out.
4.5.1 Sensor
Sensor includes three sub menus: basic, alarm handling and schedule.
• Basic
system configuration =>alarm configuration =>sensor
=>basic;Refer to Fig 4-19: Enable sensor alarm and then
set the alarm type according to triggered alarm type. Two
option: NO and NC (Normally open/closed).
To setup all channels with the same parameters
mark“all”then apply to save relevant setup to all
channels.
Reset default setting; click the“default” button and
then“apply” button to save the setting.Pressthe “exit”
button to exit current interface.
• Alarm handling
Step1: enter into system configurationalarm
configurationsensoralarm handling; refer to Fig 4-20:
Fig 4-19 alarm configuration-sensor-basic
• Alarm handling
system configuration =>alarm configuration =>sensor =>alarm handling; refer to Fig 4-20: select hold time, click Trigger button,
and a dialog box will pop-up as Fig 4-21:If Buzzer is selected, the sensor will prompt an alarm.
Note:there will be no alarm menu for DVRs that do not have an alarm system (for example the SA-4100HDX+ DVR model)
Comments to this Manuals