Provision-ISR SA-8200SDI-E User Manual download pdf (Page 38)

Digital Video Recorder User Manual

3 Basic Function Instruction

3.1 Power On/Off

Before you power on the unit, please make sure all the cables are connected properly.

3.1.1 Power on

Step1:Plug in thepower; switch on the power button (16-channel DVR only)

Step2:The device will start loading, and the power indicator will have blue color.

Step3: Before loading the camera view, a WIZZARDwindow will be pop-up and you could changethe time zone, time setup,

network configuration, record configuration, disk management and more. User may or may not perform initial setup here or

perform the setup from the menu as described on the relevant chapters. The setup Wizard is optional, to skip this step click on

the "Exit" button. To disable the wizzardmark the option "startup wizzard" on the first page of the startup.

Notice: this serial device displays the menu either on VGA monitor or on the BNC monitor.To switch between the two outputs

press the "ESC" button until you hear a long beep.

If there is no display or you can only see the cameras without the main menu after clicking the right button on the mouse press

the "esc" button until a beep sounds. The VGA and video out (BNC) displays will switch.

3.1.2 Power off

You can power off the device by using remote controller, keyboard or mouse.

By remote controller:Press the "Power" button, the Shutdown window will appear, click "OK", the unit display a message on the

screen,"it is now safe to unplug the DVR".Now you may disconnect the power line.

By keyboard and mouse:Step1: enter the Menu, then select “System Shut Down” icon, the Shutdown window will

appear, click OK,the unit display a message on the screen,"it is now safe to unplug the DVR". Now you may disconnect the

power line.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 123 124

No comments

Provision-ISR SA-8200SDI-E User Manual Page 38